BigLee's latest activity

Thanks. this is very interesting and makes a lot of sense. Tightening the retaining tab has made my care work better. I suppose it could...

I've used one of these basic momentary to latching logic modules on a project years ago, never had any issues with it. It worked...

I hope this pic helps a bit. You can see how it's rather tight to get to the screw that holds the cable on. I bought a 5.5mm ratchet...

52 (ear lobe) definitely, if it was broken or cut. Possibly 53 too. And yes, the gear on the end of the cable drives the gear teeth on...

Well, mostly it's positive going in, and positive going out. It's not considered negative until the current has passed through its load...

53 or 52? The "ear lobe" part is what's labeled as 52. Sounds like the original may have broken. If that broke, it could mean a stuck or...

Can you be more specific about which exact parts are missing? Perhaps list some of the numbers from the diagram that are missing on yours?

I have looked at this, and it looks like it could work if you connect the factory switch, which is a momentary switch to request the BCM...

I understand all that. I just left it in that one time, just to see how far I could go with it. Since then, I typically remove it every...

Just an update on this. I previously stated that I still had the block off in place in hot weather, and the A/C still worked OK. While...

I wasn't having any issues, just saw a simple improvement that could be made. The nut you are showing to tighten, isn't that just a box...