K-Bob
New member
In our shop right now is a 1.4t with only 30k miles with a broken piston due to severe detonation (spark knock).
I saw the busted piston and talked to the tech. This is the same GM master tech I go to with my car.
It is very important to use at least 89 octane in these engines. My tech recommends 91 octane and strongly urged me to never ever never put 87 in mine.
These are high temp, high pressure engines, and it is a little odd that they are one of the only turbos that do not spec premium fuel.
I had already made the decision to use 89 octane since my car obviously runs smoother and gets better mpg with it. And after seeing that broken piston I am for sure never using 87 again.
It is well documented that these cars are programmed with a 91 octane curve.
So if you want your engine not to explode, with the added benefit of marginally better performance, run premium (or at the very least 89).
I saw the busted piston and talked to the tech. This is the same GM master tech I go to with my car.
It is very important to use at least 89 octane in these engines. My tech recommends 91 octane and strongly urged me to never ever never put 87 in mine.
These are high temp, high pressure engines, and it is a little odd that they are one of the only turbos that do not spec premium fuel.
I had already made the decision to use 89 octane since my car obviously runs smoother and gets better mpg with it. And after seeing that broken piston I am for sure never using 87 again.
It is well documented that these cars are programmed with a 91 octane curve.
So if you want your engine not to explode, with the added benefit of marginally better performance, run premium (or at the very least 89).