Search results

Yes, inexpensive.. but not free.. like repairing the box. I've talked to 3 other people locally who had the same problem with their small Chevys. Seems to be a common problem. I'm wondering how many of these things are in the scrap yard because of this.. overheated, toasted the engine.

Far out man, that worked. I did not expect that. AC and fan are working. I tightened up the connectors for that relay. That's it. What a trip.

Well.. the fuse box is more then just a fuse holder... A circuit board, 6 big chips, a plethora of smaller chip things and a bunch of prongs for everything to plug into. I have no idea how to test the chips. The top of the board looks okay. I'll see if I can get the board and look at the bottom...

I just pulled the fuse box apart and put it back together hoping it was a bad connection. No change. The fuse box is just a big holder for the fuses and relays and there's 3 big harnesses bolted to it from the bottom and plugging the harnesses into the fuses and relays. I'm guessing if it's bad...

The ambient air temp sensor was completely missing, ripped from the grill, wires loose. I replaced the sensor and the AC compressor will now come on.. until the engine gets hot. The fan still won't come on. We found a service receipt in the glove box from when my niece had it in the shop. On...

I haven't tried Tapatalk yet. It's popular in a couple of other forums I'm in. And I haven't looked at the upload info for this site yet, I was probably screwing something up. No connector on the wire, looks like it was cut. I found another wire in the loom with it that was cut and taped off. I...

Well, snapped pic. Then took a screenshot, then cropped the screenshot, but it's still too big to post... Anyway.. the stray wire is behind the bumper cover on the passenger side frame rail. It's in a loom by itself and is black with a grey or white stripe. Any ideas?

I also jumped power to the fan, to the 87 pin on the fan3 relay, and it comes on. Looking at the wiring diagram I found online, it shows two coolant temp sensors. Sensor 1 at rear of block and sensor 2 at lower right of radiator. I'm going to try ohming out the wires between sensor 2 and the...

I'm here for the same reason. 2013 1.4 turbo. My niece hit a big turtle in road and the AC stopped working, among other damage that I've already fixed. I've replaced the bent condenser, leaking line from condenser to compressor. It will hold pressure but compressor wont kick on. I noticed the...

Oh, yeah I have. This is 17... Good ol 17.

Have I hit 10 yet?

I'm ready for it to disappear so I can park my M715 inside before the canvas top starts rotting away.

And now it's been sitting in my shop, ready to go but no AC, already paid for and in my way.

So while I working on it, my youngest stepson bought it from me. $1500, it has a rebuilt title.

Replaced all that and no leaks, compressor won't kick on. Really, I'm not asking questions yet, just spamming.

Replaced the bumper cover too. Condenser was bent and a line from condenser to compressor was leaking, rubbing on fan shroud.

Apparently a BIG snapping turtle. It cracked the bumper cover and it was flapping around.

No more leaks. But AC isn't working. It was working before she hit a big turtle on the highway.

So I fixed the obvious stuff. Replaced water pump, thermostat and outlet.

So I told my niece to come get it. She could have the Fusion and I'd take the Sonic.