Search results

Found a place than can send me a preprogrammed & flashed ECM, but curious if there anything particular about the swapping process I should know. Is it as simple as disconnecting the battery and swapping the ECM? I do know I have to do a 30-minute relearn for the key, but is there anything I'm...

1. I've had the P0011 code for 2 years and can't keep it off for more than few hours now. I've sunk $2000+ into fixing it and all that left is reprogramming/replacing the ECM (suspected glitch or short in it), but the shop I usually go to says I need to go to a dealer for that fix. Dare I ask...

Still an issue for me now (almost 2 years and $3k later). Last guess I got was that I need to replace the ECM and get it programmed (presumed fault/short in the ECM). I had an added symptom for a day; the car would only drive forward in 2nd gear, so it was slow to go and capped at roughly...

Appreciate the response, but that fix has been tried already and made no difference.

Update! The "historic fault" cleared Saturday night, and I was able to pass emissions Sunday morn; however, BEFORE I PULLED OUT OF THE TENT THE LIGHT WAS BACK ON. Same code again "Pending P0011" and 1 readiness check incomplete again (Evaporative Sys). Any known Sonic glitch/issue I'm dealing...

I've been dealing on and off with a P0011 code for over a year and it won't go away. The Sonic has been in the shop 4 times total at 2 different shops in addition to my own repairs. I'm at the point the car runs/works perfectly fine, all readiness tests have passed, but the service light is...

Trying to get this fixed myself. Had the sprockets and timing kit installed back in January and everything was fine for about 3 months then the engine light came on with the same code. Changing the solenoid(s) is my next step. Dare I ask, do you have the 1.8L engine and did you replace one or...

Do I need to replace just one or a pair of solenoids for the value timing (on the 1.8L)? I have a P0011 code and my sonic is idling rough (even died at a red light twice). I already the timing belt and gears replaced when I got the code last time and I think the solenoid(s) are to blame now...