deadsexyii
New member
2013 RS 1.4L 60k miles. Coolant reservoir tube was rubbing against the block and eventually wore a hole in it. Replaced the tube, drained the radiator. That nut was a b**ch by the way. I couldn't find the block drain. Ran 2 gallons of 50/50 through it and figured that was a good fluid change. When I filled it, I used a vacuum fill system and could only get it to hold about 10 lbs. It would drain to 25 lbs, but the instant i let off the air there was a distinct leak coming from what sounded like the air box. Next thing I did was check the oil and it doesn't look milky.
Should I expect it to hold 25-30 lbs and if so, ideas as to what the problem is? Don't say head gasket.
Should I expect it to hold 25-30 lbs and if so, ideas as to what the problem is? Don't say head gasket.
