Got some low in my life

[DWolfe2010]

I recently adjusted my sonic's ride height...how does it look?

even got tail pipe closer to ground. really wish I had a cutout in my bumper

really would like feed back, also if anyone knows anything about making an exhaust cutout in my bumper can you help?

 

[SoCalRs]

Looks Good Bro , I never cut out a plastic bumper but used different tips to fit better I guess a dremel or fine tool style cutter would cut the bumper without screwing it up looks like a more square oval style RS type or dual round tip would work for you there.

 

[DWolfe2010]

Looks Good Bro , I never cut out a plastic bumper but used different tips to fit better I guess a dremel or fine tool style cutter would cut the bumper without screwing it up looks like a more square oval style RS type or dual round tip would work for you there.

I just hate how it has to sit under the bumper, and it's really low cause the idiot welder screwed it up

 

[sonic_braaappp]

Looks good! For the cutout, I had to make one on my old Dodge neon. While the bumper was mounted, I held the exhaust tip where I wanted it, drew a line around the tip with about 1/2 to 3/4 of an inch of clearance all the way around, removed bumper and cut it out with a band saw lol

 

[Stew]

Looks good, I really like these sedans. I actually think the stock 15 and 16 inch wheels look good. I cut out holes for fog lights in a front bumper which would be real similar. I used a Rotozip which made short work of the plastic bumper and smoothed the cutout with sandpaper. You could then go over the edges with touch up paint but with a black car you probably don't need to.

 

[Brad Ferrell]

Looks good. Thanks for putting the pics up and paying it forward. I know when I was deciding on springs it was hard to visualize because there were so few people with sedans who had dropped their cars.

 

[SonicIce]

Looks good, sedan setting pretty

 

[DWolfe2010]

Looks good. Thanks for putting the pics up and paying it forward. I know when I was deciding on springs it was hard to visualize because there were so few people with sedans who had dropped their cars.

Looks good, I really like these sedans. I actually think the stock 15 and 16 inch wheels look good. I cut out holes for fog lights in a front bumper which would be real similar. I used a Rotozip which made short work of the plastic bumper and smoothed the cutout with sandpaper. You could then go over the edges with touch up paint but with a black car you probably don't need to.

Looks good, sedan setting pretty

Just an update on how she sits now guys

Cause #UniqueLOW

 

[612roots]

So do you have just lowering springs or coilovers? It looks awesome man!

 

[KPM]

Looks good.

How much is your car lowered in the January pictures ?
And how much more lowered in April?

For the cutout I would trace the new opening on the facia with the exhaust tip in place. For a black car I'd use a silver or gold Sharpie marker as they remove with rubbing alcohol.
Then I would lower the exhaust and use a 2" drum sander on an electric drill. Rough in opening with course and finnish to the line with a fine sanding drum.