Klutch SL5 Wheel HELP

[sonix13]

I found some of these locally someone is selling. :banana:

18 8.5 Front and 18 9.5 Rear.
Bolt pattern 5x100.
Offsets 35 F and 42 R

Anyone know if I will have issues with fitment if I get these?
Other than the re drilling for our bolt pattern...

 

[2014 Blue RS]

I was looking at the SL14's. Love that lip

 

[2014 Blue RS]

Walker (MPFab) has these. He's running the 18x9.5's all around with an et of 43 I think. Said the fronts were a pain and had them narrowed a half inch. Sounds like it will be close but could/should fit for you since going 8.5 in the front.

But I'm right there with ya. And by the way, I talked to them last week and if you order new they will do the 5x105's that we need. Also, I posted a question about offset and got a response.

 

[sonix13]

These are 5x100 but they are like $800 new in the box vs 1200 new in box + shipping
So I will just have them re drilled I think if I end up getting them.
Pretty cool that they will do a 5x105 though

 

[DWolfe2010]

Walker (MPFab) has these. He's running the 18x9.5's all around with an et of 43 I think. Said the fronts were a pain and had them narrowed a half inch. Sounds like it will be close but could/should fit for you since going 8.5 in the front.



But I'm right there with ya. And by the way, I talked to them last week and if you order new they will do the 5x105's that we need. Also, I posted a question about offset and got a response.

Walker Morgan isn't 9.5 all the way around. He runs like 9 wide in the front. With offset 35 I think. And 18x9.5 et42 in the rear. He has a thread of his build floating around here.

But I also have those same wheels, I paid 1300$ with shipping and redrill included. But mine are 18x9.5 et25 all the way around. Your fitment should be very very easy after a redrill. Just be careful when it comes to choosing a tire size. Here's a general idea.


I will admit, fitting a 9.5 wide was a pain to my life and wallet. But I watched MPFab's build very closely. He said anything 9 inches wide with an offset of like 35 or lower or something like that. And I said screw it. I'm goin in hahah.
SO GET THE WHEELS AND MAKE THEM LOOKS GREAT LIKE HE AND I DO! #KlutchWheelsFTW!

Cause #UniqueLOW

 

[DWolfe2010]

In fact those wheels will fit so good. The fronts will be relatively flush and the rear will sit pretty dang close as well. Wrap the front in a 225 width and your preferred height and the rear in a 235 or if you prefer more width 245. Gonna look great


Cause #UniqueLOW

 

[sonix13]

In fact those wheels will fit so good. The fronts will be relatively flush and the rear will sit pretty dang close as well. Wrap the front in a 225 width and your preferred height and the rear in a 235 or if you prefer more width 245. Gonna look great


Cause #UniqueLOW

That's good news, I'm supposed to go check them out after my show on sunday. Keep your fingers crossed...

 

[2014 Blue RS]

Like like like.

 

[Thaifight-R]

Was going to reference to DWolf, but it looks like he found his way here already. lol

IIRC, MPFab had 18x9.5 +42 all around but cut half an inch from the inner barrel for the fronts, thus making them about 18x9 +35.

 

[sonix13]

Well this thread was pointless, I called them after my show on Sunday and he had already sold them Saturday night...

 

[2014 Blue RS]

That stinks. Sorry man. Knowledge for next time . .