Can anyone give me a little insight? I’ve done some diag on the system myself, so far I’ve checked all fuses and relays, changed out the pressure transducer switch, checked pressure on low side line. I put a meter on the fuses inside the car with switch on and both get 12.5, I did the same under the hood for the compressor clutch FUSE and it gets 12.5, I tested the relay but there’s no power to it... put the compressor clutch relay in the high beam and they work so I’m guessing the relay itself is good. When I turn my ac switch on the idle in the car changes but I cannot get cold air still, compressor clutch will not engage. I’ve read up on so many things and have searched the forum high and low but no straight answers or even a good place to start. Should I get a new compressor/clutch? I also did try jumping the relay with a paper clip but just not getting power there for some reason. HELP! Really don’t want to have to take it somewhere when I’m more than capable of replacing parts on my own but I absolutely need some diagnostic help/direction! Thanks guys!