rear/front stabilizer bar suggestions..
- Thread starter HDG
- Start date
2014 Blue RS
Active member
Chevrolet Sonic (Hatchback) T-300 1.4 (2011) Aftermarket Performance Parts / Accessories / Spare Part - Ultra Racing Product Catalog
I've got the DDM rear brace now. At higher speeds and cornering I can feel the improvement. But it squeaks so I'm not in love with it.
I've got the DDM rear brace now. At higher speeds and cornering I can feel the improvement. But it squeaks so I'm not in love with it.
zippypcs
Site Supporter
Just an FYI if you take that bar off and grease it with brake caliper grease it will not make any squeaks or noises for a very long time. Another wise and helpful forum member turned me onto this.
carsNskis
New member
Why are you spamming in regular posts?? You go here noob:
http://www.sonicownersforum.com/forum/showthread.php?t=15739
Looks like your first time in a forum. It can be a little intimidating there guy, but don't worry. Search still works the same here as it does in the real world.
again, thank you...your really going above and beyond.
it's posters like you that make the interwebz a great place.
thanks again.
and again.
P.S. if you post another helpful reply to this...thanks in advance.
carsNskis
New member
Not many front options, but you can upgrade the end links.
There's an a brace out there by Ray Piloto and $ub$onic did a pro write up http://www.sonicownersforum.com/forum/showthread.php?t=16411
Maybe something from euro GM would work, like the Opel Astra?
https://www.google.com/search?q=ope...KHb0JA4MQgjYIhgMwAA&ei=F0U1V-ubNoqCjwS9k4yYCA
Rear standards are ZZP rear sway bar, or DDM Works rear brace.
There's an a brace out there by Ray Piloto and $ub$onic did a pro write up http://www.sonicownersforum.com/forum/showthread.php?t=16411
Maybe something from euro GM would work, like the Opel Astra?
https://www.google.com/search?q=ope...KHb0JA4MQgjYIhgMwAA&ei=F0U1V-ubNoqCjwS9k4yYCA
Rear standards are ZZP rear sway bar, or DDM Works rear brace.
thanks pimp.
it seems like you forum guys really like DDM works...I'm gonna look into it. might order my intake from them today. appreciate the feedback
MaD
Member
The DDM rear brace is a instant notice in the butt dyno... and the hardest part is drilling the 2 holes... make sure you use a really good drill bit not from harbor freight... and a good drill motor or air drill... but best bang for the buck [emoji41] [emoji106]
Sent from my SM-G900T using Tapatalk
Sent from my SM-G900T using Tapatalk
2014 Blue RS
Active member
If you dont mind the SQUEAKING
2014 Blue RS
Active member
Kills me to hear it everyday
zippypcs
Site Supporter
Seriously , Brake caliper grease, alot of it. I did mine over a year ago and not one sound since. 85 miles a day round trip.
I packed the little silver brackets and put it in the bolt holes as well. When I was done I took a paper towel under there and smeared it any place I could get to.
I packed the little silver brackets and put it in the bolt holes as well. When I was done I took a paper towel under there and smeared it any place I could get to.
2014 Blue RS
Active member
I'll try it then.
