Upgrading MyLink sound system

[Handalaan]

I'm looking to upgrade the stock speakers with the MyLink HU. I want to keep the HU but overhaul everything else. I believe I have everything I need to upgrade the speakers and add a subwoofer.

My current Amazon wish list has all the pieces I think I need - (Wish list here). I already have the sub amp and sub in storage.

Am I missing anything or should I be set to go?

 

[jgray1978]

You've got a PAC AA-GM44 on your wish list as well as a PAC SNI-35 LOC. The AA-GM44 is an LOC so you can dirch the SNI-35.

Other than that...You'll probably be ok. I installed that same Fosgate amp for my inside speakers. Nice amp. I used another Fosgate amp to drive a shallow Pioneer 10" because I wanted it all to fit under the rear floor of the hatchback. I used Kenwood components up front and Kenwood 3ways in the back doors. I pulled the factory tweeters out of the A pillars and replaced them with the Kenwoods.

I did get rid of the PAC all together and ran high power into the amps as they are able to handle it. I don't know if my AA-GM44 was defective or what but if I turned the volume up much on the HU, the audio would cut in and out regardless of how I had the gain set on the AA-GM44.

So after it's all said and done, it does sound somewhat better. I still feel that it greatly lacks. I just get a crap signal out of that HU with much volume. I will be replacing it with an aftermarket HU.