Zzp upgraded sway bar links

[$ub$onic]

Zzp has Metal upgraded sway bar links on there website

$25 a side.

 

[sonic007]

Worth the time and effort to swap?

 

[ahtoxa]

If yours are broken, then yes. Otherwise I can't imagine any difference.

 

[Insanika]

The plastic ones make me nervous! I'll probably invest in a pair and replace when I rotate my tires.

 

[vento]

There was someone here who already has 100k miles on their sonic. They had to have the swaybar links changed every 10k miles (or something...)

These are probably 10x more reliable than the OEM ones GM is putting on.

 

[$ub$onic]

There was someone here who already has 100k miles on their sonic. They had to have the swaybar links changed every 10k miles (or something...)

These are probably 10x more reliable than the OEM ones GM is putting on.

Had 25k on my oem ones and they are still fine. Swapped out to cobalt ones before they went though

 

[sx sonic]

Mine are just starting to make noise at 35k miles. Going to have the dealer replace them and if they fail again I'll go aftermarket.

Are the ZZPs greaseable?

 

[$ub$onic]

Mine are just starting to make noise at 35k miles. Going to have the dealer replace them and if they fail again I'll go aftermarket.

Are the ZZPs greaseable?

Yes they are

 

[sx sonic]

Yes they are

Woot woot!!

Greaseable joints seem to last longer, even if they're only greased once.
I can't recall the last greaseable joint I replaced that had been greased periodically, they just last forever.

 

[steve333]

Had 25k on my oem ones and they are still fine. Swapped out to cobalt ones before they went though

I hope they weren't the base Cobalt ones because they are crap. Swapped them out for Moog after the oem went on my Balt

 

[$ub$onic]

I hope they weren't the base Cobalt ones because they are crap. Swapped them out for Moog after the oem went on my Balt

I bought a cheap $20 set from eBay to confirm fitment then went to a better one

 

[lambertsonic]

Has anybody bought these ? I know they are for the cruze , just wondering if they will fit .

 

[SONIC1.4]

Has anybody bought these ? I know they are for the cruze , just wondering if they will fit .

They're made for the sonic actually. So yes, they fit the sonic

 

[Chrish051873]

I just purchased this from ZZP. My second set of OEM ones are making noise again.

Guessing I'm the guinea pig on this one huh

Chris

 

[BriG21]

I just bought some as well. I'll post a review when I get them installed.

 

[sx sonic]

I just purchased this from ZZP. My second set of OEM ones are making noise again.

Guessing I'm the guinea pig on this one huh

Chris

Trend setter!

 

[AustinK]

Ill probably jump on these soon also.. Mine have been replaced twice..

 

[BriG21]

Chrish051873 have you tried installing your endlinks yet? I went to install these tonight and found the the zzp endlink. is considerably much longer than stock. I am not sure these will work and I don't think I could have gotten these on even if I wanted to. Let me know what you find out Chrish051873... Also you need a 19mm wrench and a T40 Torx bit to get the stock ones off and don't forget to lift both front tires when doing it so there is no tension on the endlink from the sway bar pulling on it.

 

[Chrish051873]

I was going to put them on Saturday. Your picture shows they are a considerable amount longer, will they fit ?

Hopefully somebody can chime in.

Have you or are you contacting ZZP ?

Chris

 

[BriG21]

Yeah I will get a hold of them tomorrow. Hopefully someone else can give some advice like you said since I am by no means an experienced auto mechanic. I did try lifting the wheel hub to raise the upper mounting point on the wheel strut but it needed to be lifted quite a bit and the sway bar ending up hitting the control arm so I don't think I could have installed these even if I wanted to.