Gear Shift knob button stuck in

photon

New member

SonicBoy24

New member

seanp1

Active member

photon

New member

SonicBoy24

New member

Swordsmith

242hp/252 ft-lbs BNR EFI

seanp1

Active member

Swordsmith

242hp/252 ft-lbs BNR EFI

monzaruba

Site Supporter

Swordsmith

242hp/252 ft-lbs BNR EFI

Luv2xlr8

New member

monzaruba

Site Supporter

Dylpicklee

New member
Has anyone tried the manual key release underneath the ignition switch when the shifter is jacked up and the key can't be removed? It is described in the US owner's manual section 9-15.

Vehicles with an automatic
transmission are equipped with an
electronic key lock release system.
This system is to prevent ignition
key removal unless the shift lever is
in P (Park).
The key lock release will not work if
the battery is charged less than
9 volts, or uncharged. Try charging
or jump starting the battery. See
Jump Starting on page 10‐74.
If charging or jump starting the
battery does not work, there is a
manual key lock release. Locate the
hole below the ignition lock. Insert a
tool or key into the opening. Locate
the lever, and press it toward the
steering wheel while removing the
key from the ignition.

Not sure if that will help, but it's worth a try.
 

monzaruba

Site Supporter

Members online

No members online now.
Top