Has anyone trimmed the ZZP catback on a hatch to bring the tip in

[Black Turbo LTZ]

As it states ..I've forced the pipes in and still can't get the tip in far enough so its not sticking out like a sore thumb..anyone else got any tips(no pun intended) on pushing it back further?

 

[wasteoffilm]

I have the muffler delete system, and I cut about an inch from the connection right before the axle, this allowed a good improvement.

I later installed a resonator just ahead of the tip, and removed a bit more material between the hangers. The rear hanger doesn't let you bring it all the way in, but within 1/2 inch or so, but looks great from most angles.

 

[Eric Smit]

get a muffler shop to cut it and re weld it with the little section cut out. should be very cheap.

 

[Black Turbo LTZ]

Tip looks good...I think I'm just gonna take the S pipe off at lunch and cut off and inch or so like mentioned and see where that takes me.

 

[Swordsmith]

I didn't cut mine at all, here's how it looks

 

[Black Turbo LTZ]

I didn't cut mine at all, here's how it looks

Your tip is much different than mine.

 

[Swordsmith]

Got a pic for us then? This is from the ZZP package sold last year by DDM, it came from Solo Performance though, I guess they are the ones that actually make them.

I got a high flow second cat, and a cat back system with resonator delete, that is the tip it came with.

 

[Black Turbo LTZ]

Got a pic for us then? This is from the ZZP package sold last year by DDM, it came from Solo Performance though, I guess they are the ones that actually make them.

I got a high flow second cat, and a cat back system with resonator delete, that is the tip it came with.

I already contacted ZZP to get further info and I'm waiting on there response. Worst case I cut 1/2" or 1" off s pipe or straight mid pipe

 

[wasteoffilm]

Got a pic for us then? This is from the ZZP package sold last year by DDM, it came from Solo Performance though, I guess they are the ones that actually make them.

I got a high flow second cat, and a cat back system with resonator delete, that is the tip it came with.

I'm pretty sure ZZP had nothing to do with your exhaust system...

I also cut some off the straight section to pull the S pipe forward, to clear the fuel tank shield, and center the pipe in the gap parallel to the axle. Technically, I've modified much more than that, but I'm crazy.

 

[Eric Smit]

Got a pic for us then? This is from the ZZP package sold last year by DDM, it came from Solo Performance though, I guess they are the ones that actually make them.

I got a high flow second cat, and a cat back system with resonator delete, that is the tip it came with.

you have the DDM exhaust, not the ZZP
exhaust.

 

[Black Turbo LTZ]

For anyone's reference, 1" off the midpipe got me flush with the bumpers lines and I changed out oem rubber exhaust hanger for one off a 97 civic (drilled out the center) and it sits perfect height in the opening.

 

[rdss]

Good deal, got pics?

 

[Black Turbo LTZ]

Good deal, got pics?

[/URL][/IMG]