Torque Pro (Android) and ELM327 B/T (BAFX)

[ThatTmoGuy]

There are a bunch of tweaks in the settings to speed it up, also since its going on the tablet and I force GPU render for 2D graphics it can use full CPU power for calculations. The app has allot of tricks if you take the time to read the forums on torque.

 

[doreo]

yeah i know the app can read faster but i thought the actual ELM was restricting on the speed cause its a cheaper thing. least thats what i read someplace but who knows. if it works Sweet

 

[Turbo Lover]

Hmm, might be a dumb question, but do I need to unpair my MyLink for this to work?

 

[ThatTmoGuy]

Depends on the phone, its worth a try.

 

[emil10]

I change the extent of the wheels (18 ") to my sonic, anyone know how to configure the computer, to add the new measure of the wheels?

 

[cndctrdj]

got the pid for ait2
222006

 

[firstorbit84]

That's supposed to be post-intercooler?

My AIT reading already seems like it's post-IC

 

[cndctrdj]

I'm thinking they were mixed up. One was after and 2 was before

 

[firstorbit84]

Are there even 2 temp sensors?

 

[cndctrdj]

All the boosted gm cars have 2 sensors one is in the maf and the other is in the manifold.

 

[dai]

getting my bluetooth adapter in tomorrow, thanks for the in-depth thread and suggestions

I'm a bit of a customization nut with anything I can tweak, so I'll likely be making a few themed skins for torque pro, matching the main dash black/blue styling, maybe some car body inspired kinda things. Not that much you can do with just background, a circle and a square, but I'll figure something out

 

[cndctrdj]

That would be great. Let us know so we can download them and rate them

 

[cndctrdj]

has anyone found any new pids for the torque app and the sonic

 

[KlassKlown]

IAT2 is PID 222006 right?

 

[cndctrdj]

thats what works on the cobalts. it is different here.
i also had a calc and pid for the inj duty cycle but it only worked on the cavalier. no fun yet with this car

 

[Semmy]

I'm a newb at this and have a question. How do you guys get oil temp and pressure? I use Torque Pro bluetoothed to a ScanTool OBDlink LX. Engine Oil Temperature is listed, however, it doesn't receive data when I try it. And there is no selection for oil pressure. It connects fine and works for other readings.

I have an earlier 2012 1.4T. Does my brain box not monitor this info? I must be overlooking something really simple, but I have no idea what it is?

 

[River_Rat]

Oil pressure is not going to happen. The sensor only sends a yes/no signal, not a numerical reading. I get a reading for oil temperature using PID 221154. Have you tried using torque scan?

 

[Semmy]

Oil pressure is not going to happen. The sensor only sends a yes/no signal, not a numerical reading. I get a reading for oil temperature using PID 221154. Have you tried using torque scan?

That's what I needed. Installed the torque scan plugin and added PID 221154 for oil temp. Works great, thanks!

 

[Gavkat09]

Oil pressure is not going to happen. The sensor only sends a yes/no signal, not a numerical reading. I get a reading for oil temperature using PID 221154. Have you tried using torque scan?

Sorry but what is PID 221154.