I got 18x8 inch rims with 215/40R18 tires and the dude at the place where I tried to get them put on said the tire would rub the suspension. When I put the rim on it did seem pretty close so I believe him, but now I need wheel spacers. I need help finding some spacers with the 5x105 bolt pattern and the 56.5 mm center bore hole. I would like to push out the wheels 1/2 inch to an inch. If anyone can help me find these spacers, please let me know! I wanna put my new shoes on!!!
Wheel Spacers
- Thread starter B_Man4495
- Start date
ScarabEpic22
Member
DDMWorks makes 3/16" ones if that would work. If not, I've had great success with Motorsport-Tech, have a set JR cut for my TBSS specifically to my specs. (Motorsports-Tech makes Adaptec, Bora, and a few others too.)
MidnightClub3
New member
I have 22mm H&R's both front and back. Front's perfect; 25mm on the rear would have been better.
Sneakerfix
New member
You shouldn't need a spacer with the 18x8 +40 rim should fit just fine. With the 215
AshesToArmor
New member
Are they worth the $70 each? I'm looking to get spacers for my RS.
Beastlick
New member
If you want to be more flush without changing wheels, its the way to go.
I promise you wont be able to find better quality product for that price. I think at one point I was going to machine them myself and the aluminum blank was over $30 a piece.
sonix13
New member
I have DDM and H&R spacers, H&R are nice!
sonix13
New member
There isn't really any cons to the DDM other than they are so small.
The H&R have great quality products! The only thing about the 20mm spacers is the stock lugs stick out, but on the stock wheels there is a crevasse for them to go so you don't have to cut them. On non OEM wheels I can't say!
Breezybro
New member
Kinda slim.. But you don't know of any pictures of all 3 on an rs with stock rims do you? I want the rs lowering springs to add the effectThere isn't really any cons to the DDM other than they are so small.
The H&R have great quality products! The only thing about the 20mm spacers is the stock lugs stick out, but on the stock wheels there is a crevasse for them to go so you don't have to cut them. On non OEM wheels I can't say!
sonix13
New member
Look at my build thread...I have an RS and I had the DDM installed first they are 3/16" and then I just did the H&R 20mm They make various sizes though I do believe for our bolt pattern. Pics are in the thread...
