Since the rain has been horrible, I've had to keep postponing my mods. Started the rally stripe today, its made of vinyl, got it off ebay for $80.
Some tips:
1.Tape off one edge of your stripe all the way up/down the car. It will make your life easier. Dont overlap the decal to the tape, but get it as close to it as possible.
2.By all means use that heat gun, it will be your best friend in a wet application which I would definitely recommend.
3.No need to spend a bunch of money on application fluid, mix a little dawn with some water in a spray bottle. Works like a charm.
4. If you have a few minor bubbles dont keep heating and pressing down, you'll burn the vinyl. Take a pin as recommended pop the bubble and squeeze out the air or fluid.
5. The stripe from ebay comes pre cut to the dimensions of the car but is just slightly off. Dont worry so much about getting it completely lined up and stretching it, because you will mess it up.
Only did the front half and ran into the night, so ill post some day time pics of the rest of stripe and finished product tomorrow. I also added a 1/4 inch purple stripe, since my car is the HULK!
