Aftermarket Wheels: Post'em Up!!!

[Preloader]

You know what to do. I will update Post #1 as pics show up.

the Preloader™: Cruize 18x7.5 42mm offset BFG g-force KDW2 215/40/R18

Zach Tullier: Rotiform Nue 17x8 30mm offset Nitto Neo-gen 205/45/R17

Corbetts67: Sparcos 17x7.5 40mm offset ??? 205/50/R17

AndrewGS: Cruze Eco 17x7 39mm offset ??? 205/50/R17

dblackston: ICW Tsunam 17x7.5 Cooper Zeon 215/50/R17

JDRSMF: Enkei EDR 17x8 38mm offset Kumho Ecsta4X 225/45/R17

mitdr774: Steelies 15x6 39mm offset Firestone WInterforce 195/65/R15

Shmokica: Cruze 17x7 42mm offset 205/50/R17

Caucasian Sonic: Drag DR-19 17x7.5 40mm offset Nitto Neo Form 215/50/R17

Mooser: Konig Z-in 18x8 Hankook Ventus V12 evo 215/40/R18

12sonic440: Sparco Assetto GaraBlack 17's Offset 40mm P205/50R17

Eric.Smit: Konig Crown 17x7.5ET40 Kumho Ectsa 235/45/R17

pacman552: 17" sparcos 215/45/17 hankook evo v12's

strikerjamie: 17x7 RJR FANG

FEARONE: 18X8.75 Off Set 40MM. XXR 527 Bridgestone Tires: 235/40ZR18.

Wong: ESM-004 Drilled 17x8 et35
Hankook V12 205/45/17

I know there are quite a few other members with wheels but it's way too time-consuming to track them all down. Post them here and I'll add them.

Please include Brand, Size, Width, Offset, Tire Size and any other info that may help other members figure out what fits.

 

[SSpeckerwood]

Preloader, wanna sell your wheels and tires to me?

 

[Preloader]

Don't you have the stock 17's already? Are you talking about my new 18's?
*spits loogie on computer screen, walks away

 

[rdss]

One day I might have wheels to post in here, for now I am happy with my LTZ wheels on the LT.

 

[theenico]

Please include Brand, Size, Width, Offset, Tire Size and any other info that may help other members figure out what fits.

Since you didn't do it for yourself, the additional specs are from memory:

Preloader: 42mm offset, 215/40R18, BFG G-Force

Zach Tullier: 17x8, 30mm offset, 215 or 205/40R17, Nitto?

Corbetts67: 17x7.5, 40mm offset, 205/50R17, Unknown tires

AndrewGS: 17x7, 39mm? offset, 205/50R17, Unknown tires

 

[Eric Smit]

Konig Crowns in a 16x7.5.


-Eric Smit

 

[Preloader]

Since you didn't do it for yourself, the additional specs are from memory:

Preloader: 42mm offset, 215/40R18, BFG G-Force

Zach Tullier: 17x8, 30mm offset, 215 or 205/40R17, Nitto?

Corbetts67: 17x7.5, 40mm offset, 205/50R17, Unknown tires

AndrewGS: 17x7, 39mm? offset, 205/50R17, Unknown tires

Thanks theenico, it was hard enough to track down and copy/paste

 

[SSpeckerwood]

Don't you have the stock 17's already? Are you talking about my new 18's?
*spits loogie on computer screen, walks away

Ain't the first time I've been spat on. Usually I'm called trash after.

 

[dblackston]

17x7.5 ICW Tsunami's with 215/50 Cooper Zeon rubber.

 

[007CobaltLS]

Preloader....you should probably add KDW2 to your tires....there are 4 different G-Force tires...Sport, Sport COMP-2, T/A KDW, T/A KDW2.

Just saying.

 

[Preloader]

True. fixed.
KDW 2 and KDW NT are the same part number according to BFG.

dblackston, what your offset?

 

[dblackston]

dblackston, what your offset?

Honestly don't know. I never measured and bought used off a Cruze. The rear's seem to be "almost" flush with the fender if that helps someone guess at it for me I've never been too technical with wheels. "just slap them on and hope they fit and look good" is kinda my moto lol. Originally bought these to put of the wifes white cruze as I think they may have looked better on it, then I was gonna take her stock 16's. But then figured I would just deal with the TPMS light on my car instead of both vehicles.

 

[Preloader]

Depending on how "almost flush" they are I'm gonna estimate that they are somewhere between 42-48mm.

 

[Eric Smit]

gah, can't wait for mine to come in.


-Eric Smit

 

[dblackston]

Depending on how "almost flush" they are I'm gonna estimate that they are somewhere between 42-48mm.

I'll try to get a picture up later on, not flush enough but for the price I paid and how quickly I sold the god-awful stock 15's I cant complain.

 

[SSpeckerwood]

Thanks theenico, it was hard enough to track down and copy/paste tags to all the pics that I put up. I'll edit in your "memory numbers" and if someone wants to correct them, I'll gladly adjust the info.[/QUOTE]

Now imagine doing 3 threads a month for the SOTM contest. Lol

 

[rdss]

It should be getting easy as long as you've been doing it.

 

[SSpeckerwood]

It should be getting easy as long as you've been doing it.

A bit. Mostly time consuming.

 

[Preloader]

Now imagine doing 3 threads a month for the SOTM contest. Lol

Yeah, I hope you get compensation. Could't pay me enough to be a mod. Just keeping up the 1/4mile thread and now this wheel thread is gonna wear me out.

 

[ZachTullier]

very close.
17x8 et 30 Rotiform Nue's
205/45/R17 Nitto Neo-gens