Search results

I'm in the process of painting the chrome rings for my headlights and tail lights. All eight of the rings have been removed from the car. I won't be able to finish this project by tomorrow and I need to get to work. Should I be worried about driving my car without this trim for a few days? It...

I DO NOT CONDONE STREET RACING. This took place on a very wide, straight, and smooth one-way road with two lanes. The speed limit on this road is 50mph. There were guard rails on either side and absolutely no trees, houses, or other buildings within hundreds of feet from the road. This was a...

I need exhaust gaskets to hook up my anaconda system to my zzp cat back. Where can I get them? I've never run my car without gaskets. Would it be a bad idea to run it for a little while without them? Thanks.

Good morning, I have a 2013 RS. Current mods below: -Eibach lowering springs -Front and rear aftermarket sway bars -MPFAB Intake -MPFAB Anaconda downpipe -ZZP Catback -Trifecta tune -Fast Hayaku wheels with Michelin Pilot tires Along with taking care of chrome trim in the next few...

I got my tune years ago and now it won't let me flash back to stock for emissions testing. What gives? The original tune I received is a TRT file. I sent in a request for support to Trifecta and haven't heard back yet. I'm getting really fed up with the lack of support for this company. I paid...

Guys, I need some new gaskets. Switching out the anaconda for factory cat section to pass emissions every year has taken a toll on my OEM gaskets. Where can I get replacements? Thanks

This question is for the mechanics on here that know our sonics very well. What do you think would be a realistic drivetrain swap for our sonics? I vaguely remember the idea of a full evo swap (engine, trans, AWD system) into the sonic. How realistic would this be exactly? We do have quite a...

2013 RS 6MT 20k miles - MPFab intake, anaconda, ZZP catback, front + rear aftermarket sway bars, eibach lowering springs, moog end-links, aftermarket wheels and tires (17x8 235/45). I hear a grinding noise (coming from the front) when rolling in neutral. When I am in gear and accelerating I do...

Hey guys, I have a 2013 RS with a bunch of mods including moog end links and the BNR front sway bar. I had some noise issues at the front end last year when going over bumps. My mechanic discovered that the sway bar had to be adjusted to clear the sub frame (was making contact over bumps)...

So I have this squeaking that is occurring in cold weather. It's only getting worse as the temperatures are dropping here in MA. I always let the car warm up 4-5 minutes if the temperatures are below 40 degrees outside. Nevertheless, when I start driving (and the car isn't fully warmed up yet) I...

Possible? I thought I read something a while ago on here about a company looking into it.

2013 RS Anaconda RS catback MPFab intake Full trifecta tune J-fitting I can't pass emissions and I'm running out of time. I'm getting a P0171 code (02 sensor reading lean). I'm also failing evap in my readiness tests (P2270). Is ANYONE in MA with similar mods that passed inspection? Does the...

'13 RS: anaconda, ZZP cat back, MPFab intake, full tune. I keep getting a p2270 code. It's reading lean at the O2 sensor. I got the j fitting to prevent a CEL but I'm still getting one. Any ideas?

I searched and couldn't find what I was looking for. 2013 RS 6spd, MPFab intake + Anaconda, RS catback. Full tune My evap is showing "fail". Not "not ready". Any ideas?

Eibach's, ZZP rear bar, BNR front bar, Billet end links, 17x8 235/45. 2013 RS 6spd. It's very inconsistent. Sometimes it's hard to hear, other times it's obvious. It seems as though it gets worse the more I drive. After letting it sit overnight I never hear it when I first get in and drive in...

I ordered the system with the third additional bung...however all three bungs are located before the cat? Can someone explain...why?! So confusing.

If one were to install the anaconda without a tune how long (roughly) until a CEL? Would there even be one? The reason why I ask is because I believe my tune was not flashed properly, however, I do not have a CEL and I've put about 50 miles on it with the anaconda + ZZP cat back and MPFab...

Holy crap...nuff said. My 2013 RS 6spd was completely stock up until this past Friday when I took it to the shop for handling modifications. I did NOT test the car with each piece individually. My review is based on the difference between a stock RS and an RS with the lowering springs and sway...

Yup. Just rolled 10k miles and wanted to post an update. The car is currently stock. Haven't had a single issue with it besides the 1-2 shift grinding issue and an occasional vibration in my dash at 2500 RPMS. The stitching in my seats could have been better. I can already see some of the...

2013 RS Manual. I charge my phone in my car all the time and I think I screwed up the USB port in the upper glove compartment. When I plug my charger in it makes a quiet whining sound and my phone does not charge. Should I just take it into the dealership or is there a trick to fixing this...