Clutch Masters Flywheels AND Clutch kits soon on www.TurboTechRacing.com

[TurboTechRacing]

Clutch Masters Flywheels AND Clutch kits soon on www.TurboTechRacing.com

We have been a direct Clutch Master distributor for many years.

We will soon be adding the FX series clutch kits for the Sonic on our site.

They also offer a light weight (13 lbs) aluminum flywheel option, which works with the stock clutch or the clutch masters clutch!

 

[Eric Smit]

awesome. Thanks!


-Eric Smit

 

[Preloader]

This is rapidly making its way to the front of my must do list!

TTR strikes again!!!

 

[Swordsmith]

I've been running the prototype of this kit around for the past couple weeks, and pushing 230hp and torque off the scale of my UG for the past several days.

I was warned that the clutch would likely be grabbier and have a learning curve to it, but quite the reverse, placement and pressure at the pedal are tbe same and operation is smooth as a teflon frying pan, no learning curve at all.

I don't know how much of this is the clutch and how much the flyhwheel, since I put both in at once; together it's a great upgrade.

 

[Preloader]

I want to know if the aluminum flywheel will mate to the 6 puck KY (not so jelly) clutch. Or is a puck style a bad idea on aluminum?

 

[corbetts67]

i just ordered the stage 3 ky from you all, should i have waited?

 

[Eric Smit]

Good clutches, different brands. Buyer's choice.


-Eric Smit

 

[Preloader]

i just ordered the stage 3 ky from you all, should i have waited?

That's the one I want, are you doing a flywheel too?

 

[corbetts67]

no flywheel for this guy until i add wings and i can really fly

 

[Tommyboy4725]

Any idea about how much the stock flywheel weighs?

 

[Eric Smit]

travsonic posted it. I'm not digging it up.


-Eric Smit

 

[corbetts67]

That's the one I want, are you doing a flywheel too?

will the flywheel work on the ky clutch?

 

[Preloader]

Trying to find out.

The stock clutch is like 23lbs IIRC.

 

[Eric Smit]

weights.

http://www.sonicownersforum.com/forum/t460/


-Eric Smit

 

[ThatTmoGuy]

Dig the new avi Eric.

begin tune chant here...

 

[nocoolnames]

Sweet ill be ordering one of these after my wife gets done learning to drive stick. No sense in her destroying the new clutch and I won't need the old one anymore.

 

[seanp1]

I've been running the prototype of this kit around for the past couple weeks, and pushing 230hp and torque off the scale of my UG for the past several days.

I was warned that the clutch would likely be grabbier and have a learning curve to it, but quite the reverse, placement and pressure at the pedal are tbe same and operation is smooth as a teflon frying pan, no learning curve at all.

I don't know how much of this is the clutch and how much the flyhwheel, since I put both in at once; together it's a great upgrade.

I keep meaning to ask. Did you upgrade your clutch because you could or did you burn yours out already? How many miles?

 

[River_Rat]

I keep meaning to ask. Did you upgrade your clutch because you could or did you burn yours out already? How many miles?

He upgraded his clutch as a prerequisite to the ridiculously high torque red pill tune.

 

[rdss]

Quote:
Originally Posted by Swordsmith
I've been running the prototype of this kit around for the past couple weeks, and pushing 230hp and torque off the scale of my UG for the past several days.

I was warned that the clutch would likely be grabbier and have a learning curve to it, but quite the reverse, placement and pressure at the pedal are tbe same and operation is smooth as a teflon frying pan, no learning curve at all.

I don't know how much of this is the clutch and how much the flyhwheel, since I put both in at once; together it's a great upgrade.


I keep meaning to ask. Did you upgrade your clutch because you could or did you burn yours out already? How many miles?
?

+1

 

[seanp1]

So, basically... because he could and because he needed to. I was just wondering about the longevity of his stocker.