FS: Ported & V2 check valve modded Intake Manifold 1.4L

[Pirate Luke]

Sold.

 

[gnonne]

Are those 3/8 inch brass compression fittings like on many air compressors, or some other size?

 

[Pirate Luke]

They are 1/4 NPT, I just purchased a few kits from XtremeRevolution over at Cruzetalk a few months ago and used one of the V2 kits on it. I believe his list is here: https://www.cruzetalk.com/forum/34-gen1-1-4l-turbo/175793-2011-2016-cruze-1-4l-pcv-system-explained-post2706346.html#post2706346

 

[Pirate Luke]

Price drop.

 

[eatnsleepn]

Have you tried this on a vehicle post-mod? Can you show in a pic the runner you said was bent? Could it effect operation?

I just order a V2 kit and was going to port and fix on the same weekend. This could be a viable shortcut haha

Sent from my LG-TP450 using Tapatio

 

[Pirate Luke]

Have you tried this on a vehicle post-mod? Can you show in a pic the runner you said was bent? Could it effect operation?

I just order a V2 kit and was going to port and fix on the same weekend. This could be a viable shortcut haha

I have not, but I've tested its functionality in my shop. The check valve works as expected as does the one at the vacuum bladder. I can install and video test this weekend if anyone requires it. I'm going to be doing boost tests and other things anyway. You can see the sanded portion in the second picture in Post 1. It's nothing that will affect operation, it's right on the inside of the PCV runner internal to the gasket at the bottom.

 

[Pirate Luke]

Sold. Thank you.