Knock sensor Wiring

[T. Furgeson]

Hello gents. I’m having issues with my knock sensor in my ‘12 1.8 codes P0324, P0326, and sometimes p0327, I’ve already replaced the sensor with a genuine OEM sensor, and spliced a new connector to the harness, my question is does anyone know of the 2 clusters of wires on the ecu which contains the signal wire for the knock sensor and what color it is so I can test for continuity and possibly run new wire if needed.

 

[TurtleOverlord]

Looks like it is in connector 2 but this is for a 2013... I forget where the ECUs changed

 

[T. Furgeson]

I have LUW so should be the same hopefully now. I wonder what low reference means, I would assume signal wire is the hot side

 

[T. Furgeson]

Connector 2 would be the one on the right in my provided picture correct ?

 

[TurtleOverlord]

Connector 2 would be the one on the right in my provided picture correct ?

Don't see a picture but here is the results from a google search. I doubt the pinout is the same, but maybe the wire is the same color. Violet wire with gray stripe?

 

[T. Furgeson]

Yeah I only have the 2 connectors, I would hope so I’m going to check it out next nice day and see if I can get it figured out

 

[Tajaii]

Hello gents. I’m having issues with my knock sensor in my ‘12 1.8 codes P0324, P0326, and sometimes p0327, I’ve already replaced the sensor with a genuine OEM sensor, and spliced a new connector to the harness, my question is does anyone know of the 2 clusters of wires on the ecu which contains the signal wire for the knock sensor and what color it is so I can test for continuity and possibly run new wire if needed.

Could you possibly send me a link to the new connector you purchased? I’m having trouble finding the right one.