Spacers for OEM wheels

[Doods21]

I have a 2014 rs sonic and want to keep the stock wheels for winter but have other mods and going to get the coil over from zzp eventually but till then is there any difference in the offset vs front and back ? Like do the wheels in the front already stick out further from the shape of the car ? Or if someone can recommend a size of spacer that worked best for them I’d appreciate it !

 

[TurtleOverlord]

They are the same, and should be rotated periodically to promote even tire wear.

 

[SoCalRs]

Actually I noticed that the rear axle is out a little farther than the front I had my car slammed with coil overs and I took the rear perch out and it was only using the spring itself for awhile it was low ..
I had 17" RS wheels with 205/45/17 and I never rubbed anything even with the DDM 4mm Spacers front and rear .
The rear has a chit load of toe out I used camber shims when I put 17x9.75 wheels on it and it screwed up the toe so bad I had to remove them .

 

[SoCalRs]

Actually I noticed that the rear axle is out a little farther than the front I had my car slammed with coil overs and I took the rear perch out and it was only using the spring itself for awhile it was low ..
I had 17" RS wheels with 205/45/17 and I never rubbed anything even with the DDM 4mm Spacers front and rear .
The rear has a chit load of toe out I used camber shims when I put 17x9.75 wheels on it and it screwed up the toe so bad I had to remove them .

Although the RS wheels are narrow 17x6.75 you won't hit anything even with tires tucked under the fenders low