Suspension issues (what the heck)

[Chappy86]

I have a 2013 1.8l with 79k miles. When driving and going over bumbs, i hear a rubbing/clanking sound. I have changed the struts, and sway bar on the left and right side. Sound is coming from the ride. Any ideas?

 

[Chappy86]

Well, replaced the control arm. Still noise, any thoughts? Motor mounts?

 

[SoCalRs]

Could be low on blinker fluid had to do it ...well how about a wheel bearing or cv axle? Not much else there if you replace control arm and struts tie rod ends can clunk I had that happen to me every time I made a left turn a big clunk.

It was the tie rod ends ..

 

[Chappy86]

Could be low on blinker fluid had to do it ...well how about a wheel bearing or cv axle? Not much else there if you replace control arm and struts tie rod ends can clunk I had that happen to me every time I made a left turn a big clunk.

It was the tie rod ends ..

Ha, blinker fluid is good to go. Ill have to look into. Thank you.

 

[Chappy86]

Noise is gone, the bolt that hold the spring on to the shock came loose. Hopefully this thread helps someone in the future.

 

[WinsletshawnA]

I had the same issue with my new car. I bought it at an online auction. I didn’t see it for real before buying, only using Live Video Streaming and VIR tools, so I thought everything was very bad and I just lost my money. I read forums just for fun, but luckily found this topic. I checked the bolt and found that it came loose. It worked out, noise gone, now everything is ok.

 

[Chappy86]

I had the same issue with my new car. I bought it at an online auction. I didn’t see it for real before buying, only using Live Video Streaming and VIR tools, so I thought everything was very bad and I just lost my money. I read forums just for fun, but luckily found this topic. I checked the bolt and found that it came loose. It worked out, noise gone, now everything is ok.

Glad it worked out