Ironicdeltaman
New member
First when I go to connect it and read codes it will say check connections but I'm doing every thing right plus my connections are good. 2 how do you permanently get rid of surtin codes.
Trifecta red cable
- Thread starter Ironicdeltaman
- Start date
SONIC1.4
New member
Make sure key is not turned on at all. Plug in red cable to OBDll and into usb. Open trifecta, turn key to on position but dont actually start the engine. Go to Program Vehicle- Adjust Tune Settings- OBDII And Readiness, you can uncheck the code and then re-flash the car and it will disable that code.
Preloader
The M32 Martyr
1. Sometimes mine won't connect to the vehicle. I've found that if you quit EZ-flash and reopen it, it will work again. Also make sure the key is on before you hit OK, when it prompts you to connect.
2. What codes are you trying to disable? You will have to disable them every time before you flash a tune, but if you export and save your disable settings, it makes it super easy to just import the settings next time you flash without having to scroll down the ridiculous list of codes again.
2. What codes are you trying to disable? You will have to disable them every time before you flash a tune, but if you export and save your disable settings, it makes it super easy to just import the settings next time you flash without having to scroll down the ridiculous list of codes again.
rdss
Junior Member
First, make sure the EZ Flash software and drivers for the cable are installed properly. Second, make sure car is off, start EZ Flash, once open plug cable into your laptop, led on OBD II plug should go from red to yellow, next plug OBD II plug into OBD II port, yellow led should turn green. At this point you should be able to tune, log or check codes. Checking codes is a quick check for ECM communication. If you're still having comm issues close out EZ flash and if it persists restart the laptop.
I don't have my laptop, it's in the car or I would walk you through the monitor control options.
I don't have my laptop, it's in the car or I would walk you through the monitor control options.
Preloader
The M32 Martyr
Lately, I've been flashing up a storm with tune adjustments.
I've plugged the red cable in just about every combination possible and haven't had much issues.
My newest rush version, is that I just plug in the OBD, plug in the USB. Open EZ-flash, turn key to on and proceed with flashing tune.
It doesn't seem to matter what order you plug the ends in.
Hell, you can open the door, listen to the radio, even use the Bluetooth to make a phone call while flashing a tune. It's pretty foolproof.
I've plugged the red cable in just about every combination possible and haven't had much issues.
My newest rush version, is that I just plug in the OBD, plug in the USB. Open EZ-flash, turn key to on and proceed with flashing tune.
It doesn't seem to matter what order you plug the ends in.
Hell, you can open the door, listen to the radio, even use the Bluetooth to make a phone call while flashing a tune. It's pretty foolproof.
rdss
Junior Member
My last tune update ticket through BNR took about 4 days from submission to updated tune sitting in my inbox. You have to follow up with BNR and they do not update tunes and are at Tirfecta's mercy. If Vince is working projects one day or tunes the next it's up to him and no one else. I'm not sure why it's taking 14 days for you and longer for others.
Preloader
The M32 Martyr
I just wish I got the updates sooner... Takes 2 weeks for an update. I turn my car on after it sat overnight and it idles so low it almost stalls outCorn fed all day!
Almost dies? Mine dies once every morning. Corn don't like cold engine.
You'll get used to it, I'm not sure if it can be tuned out.
SONIC1.4
New member
I follow up with BNR everyday and they tell me they will send trifecta a follow up email. But by time that happens then its the weekend and trifecta is closed and then ill get the tune or a "everything looks good" sometime late the next week. But as long as I get it eventually, its no big deal. I just like updating the tuness and yeah I know it doesn't like cold, my idle is all messed up though. Its so bad when I cold start in the morning with the ZZP turboback straight pipe! "Pop pop pop maaaaahhhhhhhhhhhhhh pop maaahh pop". Yesterday morning my neighbor was mowing his lawn, I started my car. He stops in place, turns and just looks at me hahahah!
and yeah I know it doesn't like cold, my idle is all messed up though. Its so bad when I cold start in the morning with the ZZP turboback straight pipe! "Pop pop pop maaaaahhhhhhhhhhhhhh pop maaahh pop". Yesterday morning my neighbor was mowing his lawn, I started my car. He stops in place, turns and just looks at me hahahah!