TurboTechRacing
Supporting Vendor
Black with red and red with black are the 2 most popular color setups!
Both look great IMO.
Both look great IMO.
TTR Motor and Transmission Mounts Installed
- Thread starter BriG21
- Start date
TurboTechRacing
Supporting Vendor
More ready to ship!
TurboTechRacing
Supporting Vendor
Most do trans, but adding the upper also actually seems to reduce overall vibrations as the drivetrain is balanced-supported on both sides.
BriG21
New member
Update:
Loving the mounts. Vibrations are not bad at all anymore. Yes there is more than stock but they are very tolerable. Car also has hardly any rattles what so ever except for one little rattle near the front passenger side which drives me nuts. I finally got around to trying to find the source and think I found the little bastard. I pulled the glove box out and looked behind it as this is where the sound seemed to be coming from. I found this clip that holds the plastic floor vents which is pretty loose. I will try taping it or something to hold it solid and see if the rattle goes away.
Loving the mounts. Vibrations are not bad at all anymore. Yes there is more than stock but they are very tolerable. Car also has hardly any rattles what so ever except for one little rattle near the front passenger side which drives me nuts. I finally got around to trying to find the source and think I found the little bastard. I pulled the glove box out and looked behind it as this is where the sound seemed to be coming from. I found this clip that holds the plastic floor vents which is pretty loose. I will try taping it or something to hold it solid and see if the rattle goes away.
Attachments
-
rattle source 2.jpg -
Rattle source 1.jpg
TurboTechRacing
Supporting Vendor
Awesome! Thanks again.
TurboTechRacing
Supporting Vendor
More ready to ship!
krakenredbeard
New member
Anyone have a link to preloaders spacer trick I'm having trouble when I try to find it. I can find his how to for the mounts but not about the spacers. Thanks guys. Just ordered my mounts tonight.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
rsSteve
New member
Here you go 
Something occurred to me that might be helpful to the vibration victims. I installed these nylon bushings on top of the solid mount to get my heat shield to line up right. I went with nylon in hopes that it would help with vibration, and maybe that's why mine is not as pronounced. An easy 80cent solution if it helps.
krakenredbeard
New member
Sweet thanks.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
krakenredbeard
New member
Think mine came today home I'm at work. And it will probably be weekend after next before I get mine on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
TurboTechRacing
Supporting Vendor
Yes correct, about this.
ReeseLightning
New member
Just ordered the upper and lower mounts, will someone specify the nylon spacers that have been mentioned.
Last edited:
94383Z71
New member
Something occurred to me that might be helpful to the vibration victims. I installed these nylon bushings on top of the solid mount to get my heat shield to line up right. I went with nylon in hopes that it would help with vibration, and maybe that's why mine is not as pronounced. An easy 80cent solution if it helps.
rsSteve
New member
The spacers need to be 1/2" ID and 3/4" tall, or do like prelaoder and stack 2 at 3/8" to get you to the 3/4" tall
ReeseLightning
New member
Ok thanks Steve and Z71
Last edited:
TurboTechRacing
Supporting Vendor
More shipping today!
TurboTechRacing
Supporting Vendor
Lets see some installed photos!