DIY Stabilizer Bar Links

[Red Sonic LT]

Question, if I decide to be lazy and take it to the dealer, is it covered under warrenty?

 

[schofell84]

Anyone used the Cobalt SS links on an RS yet?

 

[SlayerAk23]

Anyone used the Cobalt SS links on an RS yet?

I second this question

 

[$ub$onic]

Anyone used the Cobalt SS links on an RS yet?

It should be the same as any other sonic. Only difference in rs suspension is the strut valving( also a slightly lower coil spring). I am however running rs struts on my Ls with ss end links. No issues

 

[mja]

I noticed there are a lot of posts on end links scratching and sqealing, does the moog end link have zerks fittings, if not are there any bushings that anyone has used with zerks for the end links?

 

[gasonright]

I noticed there are a lot of posts on end links scratching and sqealing, does the moog end link have zerks fittings, if not are there any bushings that anyone has used with zerks for the end links?

Installed these yesterday. MOOG #80252. They do have Zerk fittings. These are on a sedan LTZ. The top Zerk is out of view in this shot.

 

[mja]

Installed these yesterday. MOOG #80252. They do have Zerk fittings. These are on a sedan LTZ. The top Zerk is out of view in this shot.

it looks much better than the stock ones. plastic is great for water bottles, but suspension parts, hmm. searched your part number and found a couple threads on this, thanks! making a little shopping list for stuff that could become annoying after buying the car

 

[Luv2xlr8]

Was looking at other options for these plastic replacement stab bars and found AC Delco has one for $31.36 professional grade compared to the other brand that is the premium quality.
2013 CHEVROLET SONIC Stabilizer Bar Link

 

[Chrish051873]

Was looking at other options for these plastic replacement stab bars and found AC Delco has one for $31.36 professional grade compared to the other brand that is the premium quality.
2013 CHEVROLET SONIC Stabilizer Bar Link

not sure if those have zerk fittings or not, i got the moog for a very decent price with 30% off at advance auto

 

[fiddlerboy]

Replying here just to thank you for the photos and writeup: did this with the help from a friend with a garage (to have somewhere flat to park it), and it took us about an hour and a half, including jacking up the car and futzing with getting the bottom bolt out: there's not a lot of working room back there. I bought the Moog K750630 K750637 and greased the fittings before installing it. Other than being annoyed at how hard it is to access the bolts, everything went fine.

And now I keep wondering why I put up with that clunking sound for so long. So much quieter over bumps now!

 

[davlys]

Has anyone attempted to change the stabilizer bar itself (not the links)? Apparently you have to by the entire sway bar if the bushings are worn.