what did you do to your Sonic today?

[krakenredbeard]

Thanks!

 

[Hulty]

Had my Yoko's rotated today....I love that everyone wants to check out my car, but it comes at a price, service calls take twice as long because every tech wants to chat and/or check it out!

 

[tommylama]

Had a piece of rubber thrown at my lower right bumper by a semi; have to try and see how deep the scratches are tomorrow.

 

[littleturbo]

Did the Bov bypass

 

[ChevySanic]

Picked my sonic from the dealer and drove it like I stole it.

 

[CheapFuneral]

I spent hours pasti dipping my tail lights the wrong color

figured it would get dark when it dried, nope black cherry plasti dip.

 

[Natesriv]

did you dip the lens themselves?? or the lens surround?

does anyone make overlays?
https://www.google.com/search?q=dar...S:IE-Address&tbm=shop&spd=4996039871485067223

 

[Natesriv]

I did my corner lights in amber clear paint...

here's dark red..
Krylon Red Stained Glass Glass Aerosol Spray Paint 6-oz

 

[gijoefontaine]

How does it look?

 

[Natesriv]

How does it look?

me?

I did the fronts and rears and I used clear yellow vinyl on the fogs (not sure how hot they get and how the paint would hold up..so far it's flawless)

 

[gijoefontaine]

Lol ya you. Looks sharp. Did you just tape it off?

 

[Natesriv]

Lol ya you. Looks sharp. Did you just tape it off?

yeah, the front's have a gap that tape/paper can fit in...just taping. The rears have a line in the upper part, and the rounded lower section you can tape off easily... 3-5 light coats and boom, done!

 

[gijoefontaine]

Howd you do the round taping? Just lots of small pieces?

 

[Natesriv]

Repainted the tires, added a little color. The tire paint works good, but eventually fades to a muted white color...TYRE MARQUE&reg | Markal

Before

After

 

[mitdr774]

 

[Natesriv]

what are those off of?

 

[mitdr774]

1995-99 z24

 

[Natesriv]

ahhh yes...

I'm a fan of the 86 types..

and these

 

[CheapFuneral]

Did the whole lens but because u couldn't see the light thru them I had to tear off the break lights. I'll tint those later. I was gonna leave the reverse lights black but I decided to make it so the red part around the outside was black and the middle clear. I like it, but I'll probably tint that too. Left the corners black.

 

[krakenredbeard]

Torque solutions Delrin shift knob 10x1.25 read my build thread for the low down. I need to get some pictures of the parts that need to be modified.

Added pictures of parts that need modified to my build thread.


Sent from my iPhone using Tapatalk