MidnightClub3
New member
What size did you get?
From ltz to LTZ
- Thread starter ReeseLightning
- Start date
What size did you get?
ReeseLightning
New member
25mm, they have ones specific to our Sonic's bolt pattern, they offer other sizes but you could get custom ones if you wanted something more dramatic
MidnightClub3
New member
Seems kinda' big. Let us know if you experience tire rub or any weirdness. Looking to widen my ltz sedan's footprint too now that warm weather is coming.
ReeseLightning
New member
Tire rub on what? Should be flush with the wheel well and the springs aren't that low with 17s.
MidnightClub3
New member
I'm not saying it's gonna' rub all the time, but depending on your driving habits, some instances when cornering at speed or when the car squats hard *could* introduce some of your tire into the fender. That's just my theory anyway... I could be wrong.
ReeseLightning
New member
That's possible, I'll keep my thread up to date with experiences I have with the parts
ReeseLightning
New member
Been waiting for some funds to make my Spring purchases and finally got everything ordered and Saturday a few (
) mods will be getting accomplished with the help of a few friends.
List is as follows : Hook patterned Silver Powdercoated DDM Rotors, HPS Hawk brake pads, 25mm Adaptec Spacers, Echibach Springs, DDMA Block Off Plate cause ---> MPFab's Intercooler w/ flange for Tial BOV (atmospheric), and Mishimoto Carbon Fiber Oil Catch Can customized with 3/8" AN steel braided vacuum hosing. Oh and Colbalt end links hahaha.
Can not wait !!!! Gonna be grillin, takin tons of pics, and will share them here. These will take Tina to LTZ status !
) mods will be getting accomplished with the help of a few friends.List is as follows : Hook patterned Silver Powdercoated DDM Rotors, HPS Hawk brake pads, 25mm Adaptec Spacers, Echibach Springs, DDMA Block Off Plate cause ---> MPFab's Intercooler w/ flange for Tial BOV (atmospheric), and Mishimoto Carbon Fiber Oil Catch Can customized with 3/8" AN steel braided vacuum hosing. Oh and Colbalt end links hahaha.
Can not wait !!!! Gonna be grillin, takin tons of pics, and will share them here. These will take Tina to LTZ status
!
Brad Ferrell
New member
That's a long list. You must have been adding those thing to your wish list over a long and cold winter...
ReeseLightning
New member
P.S. sorry for the long delay.
New brakes, rotors, and springs have since been installed.
HPS Hawks brake pad on top and old OEM brakes on bottom.
New hook shot rotor curiosity DDM ( side note: awaiting spacers until wheels get drilled to accommodate lug length)
Side by side of OEM rotor and DDM's
Echibach springs
Struts removed
Brakes disassembled
Lowered and all put back together
A BIG SHOUT OUT to my boy Zack who helped me install and let me crash at his place!������!
New brakes, rotors, and springs have since been installed.
HPS Hawks brake pad on top and old OEM brakes on bottom.
New hook shot rotor curiosity DDM ( side note: awaiting spacers until wheels get drilled to accommodate lug length)
Side by side of OEM rotor and DDM's
Echibach springs
Struts removed
Brakes disassembled
Lowered and all put back together
A BIG SHOUT OUT to my boy Zack who helped me install and let me crash at his place!������!
Last edited:
