what did you do to your Sonic today?

[sonix13]

Yesterday night after work I went home and installed my new FORGE front mount and tubes from BNR. Man what a difference it makes when you have quality ****. The intake temps are cooling almost 10 degrees lower than the CX kit and doesn't heat-soak like the stock IC. Ignore all the cable ties on the car everything is kind of being held up right now as I work on things.

 

[Natesriv]

Ignore all the cable ties on the car everything is kind of being held up right now as I work on things.


Would be a good time now to inspect those Hela horns and see if there's any dirt corrosion in them. They disassemble pretty easy and some grease can be applied to prevent any corrosion...

Looking good!

 

[sonix13]

Ignore all the cable ties on the car everything is kind of being held up right now as I work on things.


Would be a good time now to inspect those Hela horns and see if there's any dirt corrosion in them. They disassemble pretty easy and some grease can be applied to prevent any corrosion...

Looking good!

Working on it actually...I had the same thought hahaha
That's why there are cable ties holding it on I lost some screws

 

[TheGreenDragon]

Dude! Forget the front bumper, that thing looks mean! Fab yourself a drift-missile tube-steel front bumper in black! :banana:

 

[carsNskis]

Dude! Forget the front bumper, that thing looks mean! Fab yourself a drift-missile tube-steel front bumper in black! :banana:

Yaaaas, rally dat ish!

Looked like he was running slicks...closer inspection = fender liner

it's not the size, it's how you drive it....

 

[brittanyhale]

I finally got an intake!!

 

[GreenGhost28]

I finally got an intake!!

I like those purple headlight rings!

Sent from my XT1080 using Tapatalk

 

[AshesToArmor]

Installed my TTR trans mount and I am FLOORED by the difference over stock. Almost zero wheel hop, crisper shifts and no noticeable vibrations.

 

[sonix13]

Got everything together just in time for the ILDS: Winterfest in Tampa Florida.
New Beastlick Custom Grille and BNR FMIC all installed as well as new Drilled and Slotted Rotors.

 

[AshesToArmor]

Installed an M Tech short shifter! I have a 2013 RS and don't think I've seen anyone else on here with a 2013+ short shifter (though I'm sure there are some).

The only hiccup during the install was taking the old shift arm off after removing the nut. It was stuck on there pretty darn good... After some "gentle" prying, it finally came off and I was able to put on the new one.

I am thrilled by how amazing shifts feel now. Shorter (obviously), smoother and more solid. Big thanks to Bad News Racing for getting one in stock for me to buy!

NOTE: I didn't reinstall the nut before snapping the attached picture just because I was so excited to finally have the new one on!

 

[mu3113r]

Yesterday I installed my new head unit and watched Elf while doing X-Mas shopping.

 

[Swordsmith]

Stripped off all the aging duct tape, cleaned everything, and then put a new set of tape on.

 

[AshesToArmor]

Put in some Philips LED reverse lights so I can actually see out of my tinted rear windshield when I back up

 

[GreenGhost28]

Put in some Philips LED reverse lights so I can actually see out of my tinted rear windshield when I back up

I've got those in my hatch. They are bright!

Sent from my XT1080 using Tapatalk

 

[AshesToArmor]

I've got those in my hatch. They are bright!

Sent from my XT1080 using Tapatalk

Heck yeah they are! Now I'm itching to get matching LEDs for the headlights, high beams, fogs and license plate lights

 

[GreenGhost28]

Heck yeah they are! Now I'm itching to get matching LEDs for the headlights, high beams, fogs and license plate lights

I got LEDs in the rear turns, rear side markers, brakes, reverse, and interior

Sent from my XT1080 using Tapatalk

 

[SuperSonicRS]

Put in some Philips LED reverse lights so I can actually see out of my tinted rear windshield when I back up

Did you purchase these from B&M location or did you get them online, I can't find led 921 bulbs in any store.

 

[gijoefontaine]

Stripped off all the aging duct tape, cleaned everything, and then put a new set of tape on.

Duct tape?

Sent from my SGH-I337M using Tapatalk

 

[gijoefontaine]

Did you purchase these from B&M location or did you get them online, I can't find led 921 bulbs in any store.

Me either.... links please!

Sent from my SGH-I337M using Tapatalk

 

[AshesToArmor]

Did you purchase these from B&M location or did you get them online, I can't find led 921 bulbs in any store.

I actually found them at Pep Boys for $29 but found the same ones on Amazon for $17 w/shipping. So I installed the ones I bought from Pep Boys and will return the ones I get from Amazon using the Pep Boys receipt (sneaky, sneaky).