Your mod is a eco sign?
Just got back from the tint shop.
QUOTE]
Is the tint the same in your side front and side back windows? I can't tell looking at my LTZ if the windows are tinted equally from the factory (but I haven't spent much time really trying, either). Did you or your tint shop decide there was a difference in your LT windows, and install different tint to compensate for it? Thanks.
Is the tint the same in your side front and side back windows? I can't tell looking at my LTZ if the windows are tinted equally from the factory (but I haven't spent much time really trying, either). Did you or your tint shop decide there was a difference in your LT windows, and install different tint to compensate for it? Thanks.
are the high beams h3 or h8?
Keep in mind- anyone that is worried about modding due to warranty- doing your own oil changes or running any oil or filter combination other than the OEM equipment can void your warranty. Google it and read some of the horror stories. If you change your own oil or take it anywhere other than the dealership for service, maintain very accurate records and keep all receipts. Even in my bolted and tuned cobalt I run only Mobil1 and acdelco filters. GM will void your warranty faster than you can blink if you spin a bearing or something and show up with a non OEM filter and any oil other than what is specifically recommended by the owners manual. Especially if the oil has a purple tint to it.
Not trying to scare anyone, just warning you guys. You should see how strict some of the foreign manufacturers are.
There are not overlays!
First i want it the LT and the had only the chroom on the grill and not the headlights
i want to order the rings but the said to me now there are not overlays when you want the chroom you must buy the hole Front headlight!
the chroom rings are molded with screw on the back!
Here is a pics of my aveo LTZ and a Aveo LT
when you watch good you see the diffrent!
Got the center caps in today.
It's going to be Christmas before I get more stuff, so I'll resume then.
When you installed the LEDs on the interior and exterior lights, did you have to clip the stock connector or did you just leave it in place and use the wire-taps? Also, did they come with the 3ohm resistors and you just decided to use 6 instead or did you have to pick those up from an electronics shop and then again for the 6ohm?
Looks Great!!