eibach pro kit
- Thread starter Wydz
- Start date
hammrdwn510
Member
Buy beer
Buy pizza
Maybe hookerz if budget allows
host an install day
Install parts
Learn shiz
Profit
Sneakerfix
New member
No more then $180
mitdr774
also a dinner prick
Here is what is needed to do it yourself.
http://www.sonicownersforum.com/forum/do-yourself-articles/3558-installing-new-springs.html
http://www.sonicownersforum.com/forum/do-yourself-articles/3558-installing-new-springs.html
sonic_braaappp
New member
Was just about to post that link lol already had it copied to my clipboard cu I just sent it to the guy that bought my eibachs lol
hammrdwn510
Member
-----------Flathead Screwdriver >1.00 Harbor Freight
-----------T-40 Torx Screwdriver >7.00 Harbor Freight
15mm, 17mm, 19mm, 21mm, and 24mm Sockets $20-25 for a home depot especial
Spring Compressor Free ninetynine..... just 40-50 deposit at Vatozone
-----------Hammer >3.00 Harbor Freight
-----------Jack Stands $25 Harbor Freight
Floor Jack $25-50 harbor freight
Air tools HIGHLY RECOMMENDED Pawnshop? this is where install day helps...
Still less than paying someone, plus you get to keep the tools!
not only that....how much is an education worth???
I didn't know a thing about my subaru, blew the trans (the first time:blankface
set up an un-install day and guys showed up,we combined tools and we got er done.....
-----------T-40 Torx Screwdriver >7.00 Harbor Freight
15mm, 17mm, 19mm, 21mm, and 24mm Sockets $20-25 for a home depot especial
Spring Compressor Free ninetynine..... just 40-50 deposit at Vatozone
-----------Hammer >3.00 Harbor Freight
-----------Jack Stands $25 Harbor Freight
Floor Jack $25-50 harbor freight
Air tools HIGHLY RECOMMENDED Pawnshop? this is where install day helps...
Still less than paying someone, plus you get to keep the tools!
not only that....how much is an education worth???
I didn't know a thing about my subaru, blew the trans (the first time:blankface
set up an un-install day and guys showed up,we combined tools and we got er done.....
DaBlackapino
Member
Just bought those Eibach Pro-Kit Spring Set along with Alignment Kit total cost was $365.55 cause i live in Alaska $72 shipping price but I get 2 day shipping via Fed Ex. So I'll be getting mine on Monday.
Brad Ferrell
New member
Mine just arrived yesterday
ScarabEpic22
Member
Wydz, let me know when you're ready to install it. Happy to help out for cheap or free w/food/drink and I have all the tools except a spring compressor (rent it from O'Reilly's). If you dont have your springs already, John (NewZJ) in Gig Harbor has a set of BG springs (I think?) he's looking to sell.
hammrdwn510
Member
hrmmmmm.......
ScarabEpic22
Member
PM him...we installed the GM Performance ones instead so he won't be installing them on his car.
hammrdwn510
Member
would like to.... no dinero at the moment, till I get my house rented out in Indiana...
Brad Ferrell
New member
I second the air tools/impact wrench suggestion. Get a breaker bar to further tighten your nuts.
Brad Ferrell
New member
How do you know?
stever525
New member
Well, Brad, since you asked... The strut bolts are pretty strong. So strong that took a 5' breaker bar and a couple pull ups on said bar to snap the head off of the bolt. The bolt head flew 20 feet and made a nice "ping" noise on the garage door. Apparently I flipped the lever on the ratchet head when I put the socket on the second bolt and didn't pay attention to which direction I was pulling. This happened on a Saturday 5 minutes after the dealer closed.
This bolt isn't widely stocked at the dealerships and the upper and lower bolts are two different sizes. I ordered the wrong one first thing on Monday and Wednesday I got the right one. I'm not likely to make that mistake again.
This bolt isn't widely stocked at the dealerships and the upper and lower bolts are two different sizes. I ordered the wrong one first thing on Monday and Wednesday I got the right one. I'm not likely to make that mistake again.