Thesavagedad
New member
Hello I keep getting a p0011 code on my sonic I have changed both VVT solenoids and both camshaft sensors and changed oil cleared code and it came back the car runs fine and starts fine ,Help please
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2017 sonic p0011 code issue
- Thread starter Thesavagedad
- Start date
bobkatstudios
New member
I think the timing thing needs relearned on computer. When I disconnected black cable overnight it ran smooth for a while but then started running rough and code came backHi
I bought a 2012 Sonic LS with 1.8
Went to pick car up and got the p0011 code.
Dealer replaced timing belt, water pump, vvt solenoids and bunch other stuff. A week after i got it back it had same code and running rough.
I replaced the camshaft position sensor and coil, and spark plugs and changed oil
bobkatstudios
New member
Don’t be surprised if code comes back or cylinder misfire codes show up. Changed spark plugs that helped and now the ignition coil needs replaced. Should permanently get rid of that code I hope.Mine's in the shop now for that plus a couple of other things. VVT pulley is bad, so it's getting timing belt, etc., done while they're in there.
Did the plugs/coils keep the code away?Don’t be surprised if code comes back or cylinder misfire codes show up. Changed spark plugs that helped and now the ignition coil needs replaced. Should permanently get rid of that code I hope.
~5500 miles after getting all the new VVT pulley, timing belt, valve cover done, the P0011 is back. Maybe camshaft position sensors?