1.8 head teardown
- Thread starter mitdr774
- Start date
MyLonewolf25
New member
Eh
I wanted to play around in some cad to just monkey around with intake designs
I just really don't feel like dropping 200+ on a spare intake or want to pull mine off the head itself just to screw around in some cad
Sent from my iPhone using Tapatalk
Italianjoe1
Member
I have a spare 1.4 intake, I could probably get you a spare 1.8 from the local junkyard also. They usually only cost about $50 that way. I bought my spare to port before I took my car apart.
MyLonewolf25
New member
I don't have the $ right now but I'll keep it in mind! Thanks!
I want to take a look at local yards first to see if they have one because i also have some plans if possible to do a retrofit for ls injectors because I know of some eBay 210lb race gas compatible ones ( good and race proven on a 1.4k hp car) or a piggy Back rail for them for high power and still keep stock Ones for bumming around town and part throttle ( they also make 42lb ones for stock for a upgrade if I want for the main set)
But a lot of high power 4 and 6c engines will run setups like this so if im already building something a piggy back setup shouldn't be too hard to add in especially with it curves and I can easily angle it for good atomization and flow
( keep in mind it's all just speculation and just a fun project I want to do)
Sent from my iPhone using Tapatalk
I want to take a look at local yards first to see if they have one because i also have some plans if possible to do a retrofit for ls injectors because I know of some eBay 210lb race gas compatible ones ( good and race proven on a 1.4k hp car) or a piggy Back rail for them for high power and still keep stock Ones for bumming around town and part throttle ( they also make 42lb ones for stock for a upgrade if I want for the main set)
But a lot of high power 4 and 6c engines will run setups like this so if im already building something a piggy back setup shouldn't be too hard to add in especially with it curves and I can easily angle it for good atomization and flow
( keep in mind it's all just speculation and just a fun project I want to do)
Sent from my iPhone using Tapatalk