Yakima/Thule or other roof racks.
- Thread starter MySonicBoom
- Start date
Thule
Hey Guys, this is the facebook dude. I am so happy I figured out how to do this. I attached some pics. I used the GM cross bars (279.00) and the thule side arm (199.99 each). The rack is awesome! THe stock bolts that come with the side fit perfect on the larger GM bar.
Hey Guys, this is the facebook dude. I am so happy I figured out how to do this. I attached some pics. I used the GM cross bars (279.00) and the thule side arm (199.99 each). The rack is awesome! THe stock bolts that come with the side fit perfect on the larger GM bar.
Attachments
-
photo 4.jpg -
photo 1.jpg -
photo 3.jpg -
photo 2.jpg -
photo 5.jpg
Great. Thanks for posting those pics. GM cross bars from the Sonic Accessories catalog look like a good fit me.
Great Pics! Do you have a part number by chance-the parts guy at our dealership can't find it
Part number
Part Number
Removable Roof Rails.
Hatchback - Removable 95932736 $ 255.00
Sedan - Removable 95932737 $ 255.00
Thule Side Arm was purchased through Thule dealer. It is the Side Arm 594XT.
I took the bikes on a 100 mile trip this weekend. They did great at 75mph+. Nice and stable. Good Luck!
Part Number
Removable Roof Rails.
Hatchback - Removable 95932736 $ 255.00
Sedan - Removable 95932737 $ 255.00
Thule Side Arm was purchased through Thule dealer. It is the Side Arm 594XT.
I took the bikes on a 100 mile trip this weekend. They did great at 75mph+. Nice and stable. Good Luck!
mister2d
New member
Since you have no fairing, how is the wind noise?
mister2d
New member
Nevermind. I went ahead and purchased the sidearm and fairing this weekend. Got some pics to share too.
I couldn't get the fairing installed correctly. The plastic brackets weren't wide enough to fit on the GM base racks.
Back to REI I go.
I couldn't get the fairing installed correctly. The plastic brackets weren't wide enough to fit on the GM base racks.
Back to REI I go.Attachments
-
rack1.jpg -
rack2.jpg -
photo3.jpg
Last edited:
ctoohy
New member
Neither Thule or Yakima make a fairing that will fit on the factory bars. I bought the Thule one and had to modify the mounting brackets that came with it to work. It works really well now, and cuts all my wind noise down. couple washers, 1/4" bolts and nuts and a drill and 20 mins and youre all set.
nice
Nice pics! The car looks sharp in white! I don't find the wind noise to be bad? The bike rack works really well with those bars. I will try the faring bracket mod this weekend.
Nevermind. I went ahead and purchased the sidearm and fairing this weekend. Got some pics to share too.
I couldn't get the fairing installed correctly. The plastic brackets weren't wide enough to fit on the GM base racks.
Nice pics! The car looks sharp in white! I don't find the wind noise to be bad? The bike rack works really well with those bars. I will try the faring bracket
mod this weekend.
mister2d
New member
Nice pics! The car looks sharp in white! I don't find the wind noise to be bad? The bike rack works really well with those bars. I will try the faring bracket
Thanks!
Well the noise is pretty obnoxious if I open the sunroof. The fairing is on now I will have to put the sidearm back to see how it is.
thebetty
New member
Has anyone hear of a Rhino rack? Rhino Rack USA | Car Roof Racks, Cargo Trays, Ski & Bike Racks I have read some good reviews about them but haven't seen any yet. They are based out of Australia and seem to be the "new kid on the block" I have used Yakima and Thule and have some old Thule accessories that when I called I was told will fit perfectly on the Euro style bars.
Rhino rack installed
Just installed my Rhino Rack DA118-DK327 and the Mountain bike carrier RBC035. I promised some pics and here you go. Wth the Rhino, the base's are all the same except the mounting pads for the feet. Other than flipping back and forth between both sets of instructions it was painless. AutoAnything shipped right away and I had within a week with FREE shipping and 15% off.
Just installed my Rhino Rack DA118-DK327 and the Mountain bike carrier RBC035. I promised some pics and here you go. Wth the Rhino, the base's are all the same except the mounting pads for the feet. Other than flipping back and forth between both sets of instructions it was painless. AutoAnything shipped right away and I had within a week with FREE shipping and 15% off.
sonic hotness
New member
Looks really good
southtownadam
New member
For those with the Rhino Rack. Did you use the MM or inches measurement for "A" The MM is not the same distance as the inches. My drivers side is fine but the passenger for some reason rubs a bit. Also anyone know if their are fairing available for rhino racks?
thebetty
New member
Use mm
I noticed there was a difference also but when I went to call Rhino Rack was closed. When I used the inches measurment I got a little rub on my drivers side so i went to the mm measurement and everything sits fine now. I called about the fairing, they are in production and 6 months out, so I went down to my local outfitter and bought a Thule fairing. Gone are the days of just attaching it to your rack. After 4 pages of assembly instructions I lost interest and will try again tonight to install it.
I noticed there was a difference also but when I went to call Rhino Rack was closed. When I used the inches measurment I got a little rub on my drivers side so i went to the mm measurement and everything sits fine now. I called about the fairing, they are in production and 6 months out, so I went down to my local outfitter and bought a Thule fairing. Gone are the days of just attaching it to your rack. After 4 pages of assembly instructions I lost interest and will try again tonight to install it.
southtownadam
New member
I moved it to the mm measurements and now I have no door rub They Thule will not mount directly. I played around a figured out a way to modify it to fit as it is supposed to. Should be very similar to Ctoohy's mod. I need to pick up 4 more t-nuts (like the ones that come stock in the Thule box) and some nuts to match. I will post pictures after I do it this weekend....
They Thule will not mount directly. I played around a figured out a way to modify it to fit as it is supposed to. Should be very similar to Ctoohy's mod. I need to pick up 4 more t-nuts (like the ones that come stock in the Thule box) and some nuts to match. I will post pictures after I do it this weekend....